SURVIVOR FILTER
Max 2-Stage Fluoride & Chlorine Home Filter
Meet the Max 2-Stage Home Filtration System
Enjoy clean, great-tasting water directly from your tap with the Survivor Filter Max 2-Stage In-Line Home Filter. Designed for easy DIY installation, this under-sink system removes chlorine, heavy metals, and unpleasant odors from municipal tap water while keeping essential minerals intact.
Specifications & Components
MODEL SKU#: H200
REPLACEMENT FILTER SKU#:
Stage 1 Filter SKU: H200-S1F
Stage 2 Filter SKU: H200-S2F*
CAPACITY:
Stage 1 Filter: up to 1,700 gallons per test data (6435.2L)
Stage 2 Filter: up to 1,700 gallons per test data (6435.2L)
USAGE LIFE CYCLE: 1 year
WATER TEMPERATURE: 42°-120°F (6°-48°C)
FLOW RATE: up to 0.5 GPM (1.8 LPM)
WATER PRESSURE: 30 PSI minimum | 60 PSI maximum
COMPONENTS
Max 2 Stage Fluoride In-Line Filter
1x Inlet DC Hose
1x Outlet DC Hose with 3/8” connection
1x Filter Housing
2x Mounting Screws
Before you Begin
Place a towel to catch any water that may come from your system during the installation process. Replace the filter cartridge when it reaches the respective capacity, usage life cycle or when a noticeable decrease in water flow is observed.
Here are the recommended tools.
Permanent marker
Towels
Bucket
How to Set Up
Make sure to clean properly before first time use.
The Max 2-Stage Home Filter in now ready to use!
Filter Installation
Date Filter
Write the installation date on the new filter label area.
Disconnect Water
Under the sink, turn the cold water supply valve to the "OFF" position. Disconnect the existing fitting on the cold water supply valve that leads to the faucet.
Connect Filter
Connect the 3/8” female connection Inlet hose end to the cold water supply valve. Connect the 3/8” male connection Outlet hose end to the existing hose that leads to the faucet.
Turn on Water
Turn the cold water supply valve back into the “ON” position.
Mount the Filter
Secure the bracket in a convenient location.
Important! Flush the Filter
Flush the filter by allowing the water to run out of the faucet for 3 minutes to remove any carbon debris.
*Any air left in the system may cause the water to be cloudy temporarily.
Complete Set-up Overview
Check for Leaks
-
Ensure all connections are tight
-
Turn on the water supplies, and check all connections for leaks
First Use
-
During first use, you may notice cloudy water. This cloudiness is air bubbles trapped within the filter. It is not harmful to drink this and it will dissipate after a week of first use. If no leaks are present, your system is now ready to use!
-
The system and installation shall comply with applicable state and local regulations.
-
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
-
Install the MAX, 2-Stage Fluoride and Chlorine In-Line Filter to a cold water supply only. Running hot water through the system will damage the fi lter and void the lifetime warranty.
-
To read more about our Lifetime Warranty, visit: www.survivorfi lter.com/warranty
What Our Customers Say
Hear From Our Happy Customers
VERY GOOD PRODUCT!
Have had one since it was first introduced. Just bought a second one as a backup.
- Steve D
WORTH ITS WEIGHT IN GOLD.
My wife and I have backpacked through Central and South America, South-East Asia and Mexico. The water filter is lightweight and easy to set up, the water tastes great and we don’t need to buy single use plastic bottles of water.
- Garry W
SUPERB CUSTOMER SERVICE
I have used Survivor products and found them to be exceptional kit but what really stands out is the fantastic customer support that this company delivers. Top class products, top class service.
- Pete U
Don't Miss Out on Future Deals
Your Trusted Partner in Every Purchase. Subscribe to our newsletter and get exclusive early access to our next sale
Survivor Filter
is a company with a simple goal - to provide people with access to clean water in any environment when they need it most.
Lifetime Happiness Guarantee
Our warranty is simple, you tell us what’s wrong, and we work to fix it. 100% Lifetime Warranty, Lifetime Customer Service, No Questions Asked, No Explanation Necessary.
To register, please email our team:
support@survivorfilter.com with a copy of your order purchase and we’ll have you 100% covered for life.
Replacements
To purchase replacement parts and filters, visit: survivorfilter.com
Contact
For filtration testing reports, frequently asked questions, international manuals or general inquires, visit: survivorfilter.com or call us at 1-888-602-6367.